Compare

+*.gif

+home-config/fish/fish_variables

+# Guix Installation

+

+## Installing Guix

+

+### Instructions

+

+- Create USB with Guix installation image

+- Boot and create partitions using graphical installer

+- Bail out right before installation begins, go to terminal

+ - Mount cow-store using herd start cow-store /mnt

+ - Download latest version of configuration using `curl -o main.tar.gz --insecure --follow https://git.ryanserver.home.arpa/ryan77627/guix-config/archive/main.tar.gz` and unpack using tar

+ - Authorize nonguix channel using `curl -o signkey.pub https://substitutes.nonguix.org/signing-key.pub and guix archive --authorize < signkey.pub`

+ - Modify/add system config for system and initialize using `guix time-machine -C channels.scm -- system -L modules/ --substitute-urls='https://bordeaux.guix.gnu.org https://ci.guix.gnu.org https://substitutes.nonguix.org' init system.scm /mnt`

+ - When installed, proceed

+- Reboot into system, assign root and ryan user a password

+- Setup system completely

+ - Clone guix-config to proper location

+ - Reconfigure system

+ - `sudo -E guix time-machine -C channels.scm -- system -L modules reconfigure system.scm` <---- may not be needed

+ - `guix pull`

+ - `hash guix`

+ - `sudo guix system -L modules reconfigure system.scm`

+ - Configure GUIX Home

+ - Install Nix Home Manager

+ - May need to sudo herd restart nix-daemon or reconfigure system to get nix working???

+ - `nix-channel --update`

+ - `nix-shell '<home-manager>' -A install`

+ - `home-manager switch`

+- Everything should now be set up and ready to use :)

+ (kernel-arguments (append (list "intel_iommu=on")

+ %default-kernel-arguments))

+ (initrd-modules (cons* "vfio_pci" "vfio" "vfio_iommu_type1"

+ %base-initrd-modules))

+ (url "https://git.rschanz.org/ryan77627/guix.git")

+ "308877be17b2c2c92d972e105e8cc6a782ab4c82")

+ "ea84538b887df3aa3bdd61d5e4c284f1548e5520")

+ (channel

+ (name 'rosenthal)

+ (url "https://codeberg.org/hako/rosenthal.git")

+ (branch "trunk")

+ (commit

+ "1deb97ada4d7d8c2d501738fcc1532a605de51a7")

+ (introduction

+ (make-channel-introduction

+ "7677db76330121a901604dfbad19077893865f35"

+ (openpgp-fingerprint

+ "13E7 6CD6 E649 C28C 3385 4DF5 5E5A A665 6149 17F7"))))

+#!/run/current-system/profile/bin/bash

+

+gather_env() {

+ # Gather needed information

+ echo -n "Type 'eb' for encrypted w/ boot, 'en' for encrypted w/o boot, or 'd' for decrypted install: "

+ read install_type

+

+ echo -n "Type system hostname: "

+ read install_hostname

+

+ echo -n "Type device file for ROOT data: "

+ read root_dev

+

+ echo -n "Type device file for BOOT data: "

+ read boot_dev

+

+ echo -n "Type device file for SWAP: "

+ read swap_dev

+

+ echo -n "Add local device on network as substitute server? (y/n): "

+ read add_local_sub

+ if [ "$add_local_sub" == "y" ]

+ then

+ echo -n "Enter IP address of server: "

+ read substitute_ip

+ fi

+}

+

+copy_and_prepare() {

+ # Associate devs with uuids

+ root_uuid=`blkid $root_dev | awk -F\" '{print $2}'`

+ boot_uuid=`blkid $boot_dev | awk -F\" '{print $2}'`

+ swap_uuid=`blkid $swap_dev | awk -F\" '{print $2}'`

+ # Let's a go!

+ echo "Information gathered. Deploying Guix on $root_dev ($root_uuid) with boot on $boot_dev ($boot_uuid) and swap on $swap_dev ($swap_uuid)"

+ echo -n "Proceed? (y/n): "

+ read install_choice

+

+ if [ "$install_choice" != "y" ]

+ then

+ echo "Bailing!"

+ exit 1

+ fi

+

+ # We are installing!

+ # Copy template to root of repo

+ if [ "$install_type" == "eb" ]

+ then

+ cp ./modules/ryan-config/deploy-templates/HostTemplateEncrypted ./$install_hostname.scm

+ elif [ "$install_type" == "d" ]

+ then

+ cp ./modules/ryan-config/deploy-templates/HostTemplate ./$install_hostname.scm

+ else

+ echo "Invalid install type (not eb, en, or d), bailing!"

+ exit 1

+ fi

+

+ # Correct the information

+ sed -i "s/ChangeMe_ROOT/$root_uuid/" ./$install_hostname.scm

+ sed -i "s/ChangeMe_BOOTEFI/$boot_uuid/" ./$install_hostname.scm

+ sed -i "s/ChangeMe_SWAP/$swap_uuid/" ./$install_hostname.scm

+ sed -i "s/ChangeMe_HOST/$install_hostname/" ./$install_hostname.scm

+

+ # Install!

+ echo "Mounting /gnu/store to destination disk..."

+ herd start cow-store /mnt

+

+ # Install the non-guix signing keys

+ echo "Installing non-guix signing keys for substitutes..."

+ curl -o sign-key.pub https://substitutes.nonguix.org/signing-key.pub

+ guix archive --authorize < sign-key.pub

+

+ if [ "$add_local_sub" == "y" ]

+ then

+ echo "Installing local substitute server's signing keys"

+ curl -o local-sign.pub http://$substitute_ip/signing-key.pub

+ guix archive --authorize < local-sign.pub

+ fi

+}

+

+install_system() {

+ echo "Beginning install!"

+ if [ "$add_local_sub" == "y"]

+ then

+ guix time-machine -C ./channels.scm -- system -L ./modules --substitute-urls="http://$substitute_ip https://substitutes.nonguix.org https://bordeaux.guix.gnu.org https://ci.guix.gnu.org" init $install_hostname.scm /mnt

+ else

+ guix time-machine -C ./channels.scm -- system -L ./modules --substitute-urls="https://substitutes.nonguix.org https://bordeaux.guix.gnu.org https://ci.guix.gnu.org" init $install_hostname.scm /mnt

+ fi

+

+}

+

+install_user_env() {

+ # System should be installed now, we can chroot in and configure the user profile now

+ # NOTE: This assumes the user "ryan" for things, so change the USER var if you change your username

+

+ # Copy some files over to prepare for reboot

+ USER=ryan

+ guix shell git -- git clone https://git.stationery.faith/ryan77627/guix-dotfiles /mnt/home/$USER/.config/guix

+

+ cp ~/guix-dotfiles/$install_hostname.scm /mnt/home/$USER/.config/guix/$install_hostname.scm

+ cp ~/guix-dotfiles/modules/ryan-config/user_first_run.sh /mnt/home/$USER/.bashrc

+

+ chown 1000:1000 -R /mnt/home/ryan

+

+}

+

+gather_env

+copy_and_prepare

+install_system

+install_user_env

+

+# Reboot the machine at this point!

+reboot

+[Personal]

+source = imaps://ryan%40rschanz.org@mail.rschanz.org:993

+source-cred-cmd = pass emails/personal 2>/dev/null | tr -d '\n'

+outgoing = smtps://ryan%40rschanz.org@mail.rschanz.org:465

+outgoing-cred-cmd = pass emails/personal 2>/dev/null | tr -d '\n'

+default = INBOX

+from = Ryan Schanzenbacher <ryan@rschanz.org>

+copy-to = Sent

+signature-file = ~/.config/aerc/signature_personal

+check-mail = 5m

+aliases = Ryan S <ryan+ritlugdemo@rschanz.org>, Ryan Schanzenbacher <ryan+guixdevel@rschanz.org>

+

+[Development]

+source = imaps://ryan_devel%40rschanz.org@mail.rschanz.org:993

+source-cred-cmd = pass emails/development 2>/dev/null | tr -d '\n'

+outgoing = smtps://ryan_devel%40rschanz.org@mail.rschanz.org:465

+outgoing-cred-cmd = pass emails/development 2>/dev/null | tr -d '\n'

+default = INBOX

+from = Ryan <ryan_devel@rschanz.org>

+copy-to = Sent

+check-mail = 5m

+

+[School]

+source = imaps+oauthbearer://rjs1877%40rit.edu@imap.gmail.com:993?token_endpoint=https%3A%2F%2Faccounts.google.com%2Fo%2Foauth2%2Ftoken&client_id=667738788924-0rdfvaq9ijfo1vk4474eb3quf8206h2t.apps.googleusercontent.com&client_secret=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

+source-cred-cmd = pass emails/rit_personal 2>/dev/null | tr -d '\n'

+outgoing = smtps+oauthbearer://rjs1877%40rit.edu@imap.gmail.com:465?token_endpoint=https%3A%2F%2Faccounts.google.com%2Fo%2Foauth2%2Ftoken&client_id=667738788924-0rdfvaq9ijfo1vk4474eb3quf8206h2t.apps.googleusercontent.com&client_secret=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

+outgoing-cred-cmd = pass emails/rit_personal 2>/dev/null | tr -d '\n'

+from = Ryan Schanzenbacher <rjs1877@rit.edu>

+signature-file = ~/.config/aerc/signature_rit_personal

+check-mail = 5m

+default = INBOX

+copy-to = [Gmail]/Sent Mail

+#

+# aerc main configuration

+

+[general]

+#

+# Used as a default path for save operations if no other path is specified.

+# ~ is expanded to the current user home dir.

+#

+default-save-path=~/Downloads/

+

+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto

+# operations. If set to "internal", the internal openpgp keyring will be used.

+# If set to "auto", the system gpg will be preferred unless the internal

+# keyring already exists, in which case the latter will be used.

+#

+# Default: auto

+pgp-provider=gpg

+

+# By default, the file permissions of accounts.conf must be restrictive and

+# only allow reading by the file owner (0600). Set this option to true to

+# ignore this permission check. Use this with care as it may expose your

+# credentials.

+#

+# Default: false

+unsafe-accounts-conf=true # I don't store my creds in this

+

+# Output log messages to specified file. A path starting with ~/ is expanded to

+# the user home dir. When redirecting aerc's output to a file using > shell

+# redirection, this setting is ignored and log messages are printed to stdout.

+#

+#log-file=~/aerc_log

+

+# Only log messages above the specified level to log-file. Supported levels

+# are: trace, debug, info, warn and error. When redirecting aerc's output to

+# a file using > shell redirection, this setting is ignored and the log level

+# is forced to trace.

+#

+# Default: info

+log-level=trace

+

+# Set the $TERM environment variable used for the embedded terminal.

+#

+# Default: xterm-256color

+#term=xterm-256color

+

+# Display OSC8 strings in the embedded terminal

+#

+# Default: false

+#enable-osc8=false

+

+[ui]

+#

+# Describes the format for each row in a mailbox view. This is a comma

+# separated list of column names with an optional align and width suffix. After

+# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment

+# characters can be added (by default, left) followed by an optional width

+# specifier. The width is either an integer representing a fixed number of

+# characters, or a percentage between 1% and 99% representing a fraction of the

+# terminal width. It can also be one of the '*' (auto) or '=' (fit) special

+# width specifiers. Auto width columns will be equally attributed the remaining

+# terminal width. Fit width columns take the width of their contents. If no

+# width specifier is set, '*' is used by default.

+#

+# Default: date<20,name<17,flags>4,subject<*

+#index-columns=date<20,name<17,flags>4,subject<*

+

+spinner = '/,-,\,|'

+

+#

+# Each name in index-columns must have a corresponding column-$name setting.

+# All column-$name settings accept golang text/template syntax. See

+# aerc-templates(7) for available template attributes and functions.

+#

+# Default settings

+#column-date={{.DateAutoFormat .Date.Local}}

+#column-name={{index (.From | names) 0}}

+#column-flags={{.Flags | join ""}}

+#column-subject={{.ThreadPrefix}}{{.Subject}}

+

+#

+# String separator inserted between columns. When the column width specifier is

+# an exact number of characters, the separator is added to it (i.e. the exact

+# width will be fully available for the column contents).

+#

+# Default: " "

+#column-separator=" "

+

+#

+# See time.Time#Format at https://godoc.org/time#Time.Format

+#

+# Default: 2006-01-02 03:04 PM (ISO 8601 + 12 hour time)

+#timestamp-format=2006-01-02 03:04 PM

+

+#

+# Index-only time format for messages that were received/sent today.

+# If this is not specified, timestamp-format is used instead.

+#

+#this-day-time-format=

+

+#

+# Index-only time format for messages that were received/sent within the last

+# 7 days. If this is not specified, timestamp-format is used instead.

+#

+#this-week-time-format=

+

+#

+# Index-only time format for messages that were received/sent this year.

+# If this is not specified, timestamp-format is used instead.

+#

+#this-year-time-format=

+

+#

+# Width of the sidebar, including the border.

+#

+# Default: 20

+#sidebar-width=20

+

+#

+# Message to display when viewing an empty folder.

+#

+# Default: (no messages)

+#empty-message=(no messages)

+

+# Message to display when no folders exists or are all filtered

+#

+# Default: (no folders)

+#empty-dirlist=(no folders)

+

+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel

+#

+# Default: false

+#mouse-enabled=false

+

+#

+# Ring the bell when new messages are received

+#

+# Default: true

+#new-message-bell=true

+

+#

+# Template to use for Account tab titles

+#

+# Default: {{.Account}}

+#tab-title-account={{.Account}}

+

+# Marker to show before a pinned tab's name.

+#

+# Default: `

+#pinned-tab-marker='`'

+

+# Template for the left side of the directory list.

+# See aerc-templates(7) for all available fields and functions.

+#

+# Default: {{.Folder}}

+#dirlist-left={{.Folder}}

+

+# Template for the right side of the directory list.

+# See aerc-templates(7) for all available fields and functions.

+#

+# Default: {{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}}

+#dirlist-right={{if .Unread}}{{humanReadable .Unread}}/{{end}}{{if .Exists}}{{humanReadable .Exists}}{{end}}

+

+# Delay after which the messages are actually listed when entering a directory.

+# This avoids loading messages when skipping over folders and makes the UI more

+# responsive. If you do not want that, set it to 0s.

+#

+# Default: 200ms

+#dirlist-delay=200ms

+

+# Display the directory list as a foldable tree that allows to collapse and

+# expand the folders.

+#

+# Default: false

+#dirlist-tree=false

+

+# If dirlist-tree is enabled, set level at which folders are collapsed by

+# default. Set to 0 to disable.

+#

+# Default: 0

+#dirlist-collapse=0

+

+# List of space-separated criteria to sort the messages by, see *sort*

+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "

+# reverses that criterion.

+#

+# Example: "from -r date"

+#

+#sort=

+

+# Moves to next message when the current message is deleted

+#

+# Default: true

+#next-message-on-delete=true

+

+# Automatically set the "seen" flag when a message is opened in the message

+# viewer.

+#

+# Default: true

+#auto-mark-read=true

+

+# The directories where the stylesets are stored. It takes a colon-separated

+# list of directories. If this is unset or if a styleset cannot be found, the

+# following paths will be used as a fallback in that order:

+#

+# ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets

+# ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets

+# /usr/local/share/aerc/stylesets

+# /usr/share/aerc/stylesets

+#

+#stylesets-dirs=

+

+# Uncomment to use box-drawing characters for vertical and horizontal borders.

+#

+# Default: " "

+#border-char-vertical=" "

+#border-char-horizontal=" "

+

+# Sets the styleset to use for the aerc ui elements.

+#

+# Default: default

+#styleset-name=default

+

+# Activates fuzzy search in commands and their arguments: the typed string is

+# searched in the command or option in any position, and need not be

+# consecutive characters in the command or option.

+#

+# Default: false

+#fuzzy-complete=false

+

+# How long to wait after the last input before auto-completion is triggered.

+#

+# Default: 250ms

+#completion-delay=250ms

+

+# The minimum required characters to allow auto-completion to be triggered after

+# completion-delay.

+#

+# Default: 1

+#completion-min-chars=1

+

+#

+# Global switch for completion popovers

+#

+# Default: true

+#completion-popovers=true

+

+# Uncomment to use UTF-8 symbols to indicate PGP status of messages

+#

+# Default: ASCII

+#icon-unencrypted=

+#icon-encrypted=✔

+#icon-signed=✔

+#icon-signed-encrypted=✔

+#icon-unknown=✘

+#icon-invalid=⚠

+

+# Reverses the order of the message list. By default, the message list is

+# ordered with the newest (highest UID) message on top. Reversing the order

+# will put the oldest (lowest UID) message on top. This can be useful in cases

+# where the backend does not support sorting.

+#

+# Default: false

+#reverse-msglist-order = false

+

+# Reverse display of the mesage threads. Default order is the the intial

+# message is on the top with all the replies being displayed below. The

+# reverse option will put the initial message at the bottom with the

+# replies on top.

+#

+# Default: false

+#reverse-thread-order=false

+

+# Sort the thread siblings according to the sort criteria for the messages. If

+# sort-thread-siblings is false, the thread siblings will be sorted based on

+# the message UID in ascending order. This option is only applicable for

+# client-side threading with a backend that enables sorting. Note that there's

+# a performance impact when sorting is activated.

+#

+# Default: false

+#sort-thread-siblings=false

+

+#[ui:account=Personal]

+#

+# Enable a threaded view of messages. If this is not supported by the backend

+# (IMAP server or notmuch), threads will be built by the client.

+#

+# Default: false

+threading-enabled=true

+

+# Force client-side thread building

+#

+# Default: false

+#force-client-threads=false

+

+# Debounce client-side thread building

+#

+# Default: 50ms

+#client-threads-delay=50ms

+

+[statusline]

+#

+# Describes the format for the status line. This is a comma separated list of

+# column names with an optional align and width suffix. See [ui].index-columns

+# for more details. To completely mute the status line except for push

+# notifications, explicitly set status-columns to an empty string.

+#

+# Default: left<*,center:=,right>*

+#status-columns=left<*,center:=,right>*

+

+#

+# Each name in status-columns must have a corresponding column-$name setting.

+# All column-$name settings accept golang text/template syntax. See

+# aerc-templates(7) for available template attributes and functions.

+#

+# Default settings

+#column-left=[{{.Account}}] {{.StatusInfo}}

+#column-center={{.PendingKeys}}

+#column-right={{.TrayInfo}}

+

+#

+# String separator inserted between columns.

+# See [ui].column-separator for more details.

+#

+#column-separator=" "

+

+# Specifies the separator between grouped statusline elements.

+#

+# Default: " | "

+#separator=" | "

+

+# Defines the mode for displaying the status elements.

+# Options: text, icon

+#

+# Default: text

+#display-mode=text

+

+[viewer]

+#

+# Specifies the pager to use when displaying emails. Note that some filters

+# may add ANSI codes to add color to rendered emails, so you may want to use a

+# pager which supports ANSI codes.

+#

+# Default: less -R

+#pager=less -R

+

+#

+# If an email offers several versions (multipart), you can configure which

+# mimetype to prefer. For example, this can be used to prefer plaintext over

+# html emails.

+#

+# Default: text/plain,text/html

+#alternatives=text/plain,text/html

+

+#

+# Default setting to determine whether to show full headers or only parsed

+# ones in message viewer.

+#

+# Default: false

+#show-headers=false

+

+#

+# Layout of headers when viewing a message. To display multiple headers in the

+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if

+# none of their specified headers are present in the message.

+#

+# Default: From|To,Cc|Bcc,Date,Subject

+#header-layout=From|To,Cc|Bcc,Date,Subject

+

+# Whether to always show the mimetype of an email, even when it is just a single part

+#

+# Default: false

+#always-show-mime=false

+

+# Parses and extracts http links when viewing a message. Links can then be

+# accessed with the open-link command.

+#

+# Default: true

+#parse-http-links=true

+

+[compose]

+#

+# Specifies the command to run the editor with. It will be shown in an embedded

+# terminal, though it may also launch a graphical window if the environment

+# supports it. Defaults to $EDITOR, or vi.

+#editor=

+

+# Address book command

+address-book-cmd = sh -c 'abook --mutt-query "%s" | tail -n +2'

+

+#

+# Default header fields to display when composing a message. To display

+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".

+#

+# Default: To|From,Subject

+#header-layout=To|From,Subject

+

+#

+# Specifies the command to be used to tab-complete email addresses. Any

+# occurrence of "%s" in the address-book-cmd will be replaced with what the

+# user has typed so far.

+#

+# The command must output the completions to standard output, one completion

+# per line. Each line must be tab-delimited, with an email address occurring as

+# the first field. Only the email address field is required. The second field,

+# if present, will be treated as the contact name. Additional fields are

+# ignored.

+#

+# This parameter can also be set per account in accounts.conf.

+#address-book-cmd=

+

+# Specifies the command to be used to select attachments. Any occurence of '%s'

+# in the file-picker-cmd will be replaced the argument <arg> to :attach -m

+# <arg>.

+#

+# The command must output the selected files to standard output, one file per

+# line.

+file-picker-cmd=fzf --multi --query=%s

+

+#

+# Allow to address yourself when replying

+#

+# Default: true

+#reply-to-self=true

+

+#

+# Warn before sending an email that matches the specified regexp but does not

+# have any attachments. Leave empty to disable this feature.

+#

+# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The

+# "(?im)" flags are set by default (case-insensitive and multi-line).

+#

+# Example:

+# no-attachment-warning=^[^>]*attach(ed|ment)

+#

+#no-attachment-warning=

+

+#

+# When set, aerc will generate "format=flowed" bodies with a content type of

+# "text/plain; format=flowed" as described in RFC3676. This format is easier to

+# handle for some mailing software, and generally just looks like ordinary

+# text. To actually make use of this format's features, you'll need support in

+# your editor.

+#

+format-flowed=true

+

+[multipart-converters]

+#

+# Converters allow to generate multipart/alternative messages by converting the

+# main text/plain part into any other MIME type. Only exact MIME types are

+# accepted. The commands are invoked with sh -c and are expected to output

+# valid UTF-8 text.

+#

+# Example (obviously, this requires that you write your main text/plain body

+# using the markdown syntax):

+text/html=pandoc --wrap=preserve -f gfm+hard_line_breaks -t html --standalone

+

+[filters]

+#

+# Filters allow you to pipe an email body through a shell command to render

+# certain emails differently, e.g. highlighting them with ANSI escape codes.

+#

+# The commands are invoked with sh -c. The following folders are appended to

+# the system $PATH to allow referencing filters from their name only:

+#

+# ${XDG_CONFIG_HOME:-~/.config}/aerc/filters

+# ${XDG_DATA_HOME:-~/.local/share}/aerc/filters

+# $PREFIX/share/aerc/filters

+# /usr/share/aerc/filters

+#

+# The following variables are defined in the filter command environment:

+#

+# AERC_MIME_TYPE the part MIME type/subtype

+# AERC_FORMAT the part content type format= parameter

+# AERC_FILENAME the attachment filename (if any)

+# AERC_SUBJECT the message Subject header value

+# AERC_FROM the message From header value

+#

+# The first filter which matches the email's mimetype will be used, so order

+# them from most to least specific.

+#

+# You can also match on non-mimetypes, by prefixing with the header to match

+# against (non-case-sensitive) and a comma, e.g. subject,text will match a

+# subject which contains "text". Use header,~regex to match against a regex.

+#

+#text/plain=colorize

+#text/calendar=calendar

+message/delivery-status=bat -fn

+message/rfc822=bat -fn

+text/html=pandoc -f html -t plain | bat -fn

+#text/html=html | colorize

+text/*=bat -fn

+application/x-sh=bat -fn -l sh

+#image/*=catimg -w $(tput cols) -

+#subject,~Git(hub|lab)=lolcat -f

+#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize

+

+# This special filter is only used to post-process email headers when

+# [viewer].show-headers=true

+# By default, headers are piped directly into the pager.

+#

+#.headers=bat -fp

+

+[openers]

+#

+# Openers allow you to specify the command to use for the :open and :open-link

+# actions on a per-MIME-type basis. The :open-link URL scheme is used to

+# determine the MIME type as follows: x-scheme-handler/<scheme>.

+#

+# {} is expanded as the temporary filename to be opened. If it is not

+# encountered in the command, the temporary filename will be appened to the end

+# of the command.

+#

+# Like [filters], openers support basic shell globbing. The first opener which

+# matches the part's MIME type (or URL scheme handler MIME type) will be used,

+# so order them from most to least specific.

+#

+# Examples:

+# x-scheme-handler/irc=hexchat

+# x-scheme-handler/http*=firefox

+# text/html=surf -dfgms

+# text/plain=gvim {} +125

+# message/rfc822=thunderbird

+

+[hooks]

+#

+# Hooks are triggered whenever the associated event occurs.

+

+#

+# Executed when a new email arrives in the selected folder

+mail-received=notify-send "$AERC_FROM_NAME" "$AERC_SUBJECT"

+

+#

+# Executed when aerc starts

+#aerc-startup=aerc :terminal calcurse && aerc :next-tab

+

+#

+# Executed when aerc shuts down.

+#aerc-shutdown=

+

+[templates]

+# Templates are used to populate email bodies automatically.

+#

+

+# The directories where the templates are stored. It takes a colon-separated

+# list of directories. If this is unset or if a template cannot be found, the

+# following paths will be used as a fallback in that order:

+#

+# ${XDG_CONFIG_HOME:-~/.config}/aerc/templates

+# ${XDG_DATA_HOME:-~/.local/share}/aerc/templates

+# /usr/local/share/aerc/templates

+# /usr/share/aerc/templates

+#

+#template-dirs=

+

+# The default template to be used for new messages.

+#

+# default: new_message

+#new-message=new_message

+

+# The default template to be used for quoted replies.

+#

+# default: quoted_reply

+#quoted-reply=quoted_reply

+

+# The default template to be used for forward as body.

+#

+# default: forward_as_body

+#forwards=forward_as_body

+# Binds are of the form <key sequence> = <command to run>

+# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"

+# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit

+<C-p> = :prev-tab<Enter>

+<C-n> = :next-tab<Enter>

+<C-t> = :term<Enter>

+? = :help keys<Enter>

+

+[messages]

+q = :quit<Enter>

+

+j = :next<Enter>

+<Down> = :next<Enter>

+<C-d> = :next 50%<Enter>

+<C-f> = :next 100%<Enter>

+<PgDn> = :next 100%<Enter>

+

+k = :prev<Enter>

+<Up> = :prev<Enter>

+<C-u> = :prev 50%<Enter>

+<C-b> = :prev 100%<Enter>

+<PgUp> = :prev 100%<Enter>

+g = :select 0<Enter>

+G = :select -1<Enter>

+<C-r> = :read<Enter>

+<C-u> = :unread<Enter>

+

+J = :next-folder<Enter>

+K = :prev-folder<Enter>

+H = :collapse-folder<Enter>

+L = :expand-folder<Enter>

+

+v = :mark -t<Enter>

+V = :mark -v<Enter>

+

+T = :toggle-threads<Enter>

+

+<Enter> = :view<Enter>

+dd = :mv Trash<Enter>

+dg = :mv [Gmail]/Trash<Enter>

+D = :delete<Enter>

+A = :archive year<Enter>

+

+C = :compose<Enter>

+

+rr = :reply -a<Enter>

+rq = :reply -aq<Enter>

+Rr = :reply<Enter>

+Rq = :reply -q<Enter>

+f = :forward -A<Enter>

+

+# Git custom stuff ala Drew Devault

+ga = :pipe -mb git am -3<Enter>

+gp = :term git push<Enter>

+rt = :reply -aTthanks<Enter>

+

+c = :cf<space>

+$ = :term<space>

+! = :term<space>

+| = :pipe<space>

+

+/ = :search<space>

+\ = :filter<space>

+n = :next-result<Enter>

+N = :prev-result<Enter>

+<Esc> = :clear<Enter>

+

+[messages:folder=Drafts]

+<Enter> = :recall<Enter>

+

+[view]

+/ = :toggle-key-passthrough<Enter>/

+q = :close<Enter>

+O = :open<Enter>

+S = :save<space>

+| = :pipe<space>

+D = :delete<Enter>

+dd = :mv Trash<Enter>

+dg = :mv [Gmail]/Trash<Enter>

+A = :archive year<Enter>

+

+<C-l> = :open-link <space>

+

+f = :forward -A<Enter>

+rr = :reply -a<Enter>

+rq = :reply -aq<Enter>

+Rr = :reply<Enter>

+Rq = :reply -q<Enter>

+

+H = :toggle-headers<Enter>

+<C-k> = :prev-part<Enter>

+<C-j> = :next-part<Enter>

+J = :next<Enter>

+K = :prev<Enter>

+

+[view::passthrough]

+$noinherit = true

+$ex = <C-x>

+<Esc> = :toggle-key-passthrough<Enter>

+

+[compose]

+# Keybindings used when the embedded terminal is not selected in the compose

+# view

+$noinherit = true

+$ex = <C-x>

+<C-k> = :prev-field<Enter>

+<C-j> = :next-field<Enter>

+<A-p> = :switch-account -p<Enter>

+<A-n> = :switch-account -n<Enter>

+<tab> = :next-field<Enter>

+<backtab> = :prev-field<Enter>

+<C-p> = :prev-tab<Enter>

+<C-n> = :next-tab<Enter>

+<C-c> = :cc<Enter>

+<C-b> = :bcc<Enter>

+<C-q> = :abort<Enter>

+

+[compose::editor]

+# Keybindings used when the embedded terminal is selected in the compose view

+$noinherit = true

+$ex = <C-x>

+<C-k> = :prev-field<Enter>

+<C-j> = :next-field<Enter>

+<C-p> = :prev-tab<Enter>

+<C-n> = :next-tab<Enter>

+<C-q> = :abort<Enter>

+

+[compose::review]

+# Keybindings used when reviewing a message to be sent

+y = :send<Enter>

+n = :abort<Enter>

+v = :preview<Enter>

+p = :postpone<Enter>

+q = :choose -o d discard abort -o p postpone postpone<Enter>

+e = :edit<Enter>

+a = :attach<space>

+d = :detach<space>

+S = :sign<Enter>

+E = :encrypt<Enter>

+A = :attach-key<Enter>

+C = :multipart text/html<Enter>

+

+[terminal]

+$noinherit = true

+$ex = <C-x>

+<C-q> = :close<Enter>

+

+<C-p> = :prev-tab<Enter>

+<C-n> = :next-tab<Enter>

+--

+Best,

+Ryan Schanzenbacher

+--

+Best,

+Ryan Schanzenbacher

+Rochester Institute of Technology

+Cybersecurity BS/MS Student

+X-Mailer: aerc {{version}}

+

+{{.Signature}}

+

+On {{dateFormat (.OriginalDate | toLocal) "Mon Jan 2, 2006 at 3:04 PM MST"}}, {{(index .OriginalFrom 0).Name}} wrote:

+{{trimSignature .OriginalText | quote}}

+X-Mailer: aerc {{version}}

+

+Thanks!

+

+{{exec "{ git remote get-url --push origin; git reflog -2 origin/main --pretty=format:%h; } | xargs printf 'To %s\n %s..%s main -> main\n'" ""}}

+

+{{.Signature}}

+window:

+ opacity: 0.70

+ family: "Monofur Nerd Font Mono"

+ family: "Monofur Nerd Font Mono"

+ family: "Monofur Nerd Font Mono"

+export PATH=~/.local/bin:$PATH:~/.nix-profile/bin

+

+if [ -z "$SSH_CLIENT" ] && [ -z "${DISPLAY}" ] && [ "${XDG_VTNR}" -eq 1 ]; then

+ exec Hyprland

+fi

+

+alias ds='sudo -E guix system -L ~/.config/guix/modules reconfigure ~/.config/guix/$(hostname).scm'

+alias dh='guix home -L ~/.config/guix/modules reconfigure ~/.config/guix/home-config/home-configuration.scm && home-manager switch'

+alias gc='git -C ~/.config/guix add . && git -C ~/.config/guix commit && git -C ~/.config/guix push all && curl --fail-early --connect-timeout 2 -d "Guix repo updated, re-deploy!" https://ntfy.in.rschanz.org/guix_deployments'

+alias cg='git -C ~/.config/guix pull'

+alias cgh='git -C ~/.config/guix pull stationeryh main'

+alias gencs="awk 'BEGIN {print \"# Crib Sheet\"} /<!-- START CS -->/,/<!-- END CS -->/ {if (! /<!-- START CS -->/ && ! /<!-- END CS -->/) print; if (/<!-- END CS -->/) print \"\"}' notes.mkd | pandoc -f gfm -t pdf | zathura -"

+

+eval "$(zoxide init bash)"

+complete --command fisher --exclusive --long help --description "Print help"

+complete --command fisher --exclusive --long version --description "Print version"

+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments install --description "Install plugins"

+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments update --description "Update installed plugins"

+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments remove --description "Remove installed plugins"

+complete --command fisher --exclusive --condition __fish_use_subcommand --arguments list --description "List installed plugins matching regex"

+complete --command fisher --exclusive --condition "__fish_seen_subcommand_from update remove" --arguments "(fisher list)"

+complete fzf_configure_bindings --no-files

+complete fzf_configure_bindings --long help --short h --description "Print help" --condition "not __fish_seen_argument --help -h"

+complete fzf_configure_bindings --long directory --description "Change the key binding for Search Directory" --condition "not __fish_seen_argument --directory"

+complete fzf_configure_bindings --long git_log --description "Change the key binding for Search Git Log" --condition "not __fish_seen_argument --git_log"

+complete fzf_configure_bindings --long git_status --description "Change the key binding for Search Git Status" --condition "not __fish_seen_argument --git_status"

+complete fzf_configure_bindings --long history --description "Change the key binding for Search History" --condition "not __fish_seen_argument --history"

+complete fzf_configure_bindings --long processes --description "Change the key binding for Search Processes" --condition "not __fish_seen_argument --processes"

+complete fzf_configure_bindings --long variables --description "Change the key binding for Search Variables" --condition "not __fish_seen_argument --variables"

+complete tide --no-files

+

+set -l subcommands bug-report configure reload

+

+complete tide -x -n __fish_use_subcommand -a bug-report -d "Print info for use in bug reports"

+complete tide -x -n __fish_use_subcommand -a configure -d "Run the configuration wizard"

+complete tide -x -n __fish_use_subcommand -a reload -d "Reload tide configuration"

+

+complete tide -x -n "not __fish_seen_subcommand_from $subcommands" -s h -l help -d "Print help message"

+complete tide -x -n "not __fish_seen_subcommand_from $subcommands" -s v -l version -d "Print tide version"

+

+complete tide -x -n '__fish_seen_subcommand_from bug-report' -l clean -d "Run clean Fish instance and install Tide"

+complete tide -x -n '__fish_seen_subcommand_from bug-report' -l verbose -d "Print full Tide configuration"

+function _tide_init_install --on-event _tide_init_install

+ set -U VIRTUAL_ENV_DISABLE_PROMPT true

+

+ source (functions --details _tide_sub_configure)

+ _load_config lean

+ _tide_finish

+

+ if status is-interactive

+ tide bug-report --check || sleep 4

+

+ if contains ilancosman/tide (string lower $_fisher_plugins)

+ set_color bryellow

+ echo "ilancosman/tide is a development branch. Please install from a release tag:"

+ _tide_fish_colorize "fisher install ilancosman/tide@v6"

+ sleep 3

+ end

+

+ switch (read --prompt-str="Configure tide prompt? [Y/n] " | string lower)

+ case y ye yes ''

+ tide configure

+ case '*'

+ echo -s \n 'Run ' (_tide_fish_colorize "tide configure") ' to customize your prompt.'

+ end

+ end

+end

+

+function _tide_init_update --on-event _tide_init_update

+ # Warn users who install from main branch

+ if contains ilancosman/tide (string lower $_fisher_plugins)

+ set_color bryellow

+ echo "ilancosman/tide is a development branch. Please install from a release tag:"

+ _tide_fish_colorize "fisher install ilancosman/tide@v6"

+ sleep 3

+ end

+

+ # Set (disable) the new jobs variable

+ set -q tide_jobs_number_threshold || set -U tide_jobs_number_threshold 1000

+end

+

+function _tide_init_uninstall --on-event _tide_init_uninstall

+ set -e VIRTUAL_ENV_DISABLE_PROMPT

+ set -e (set -U --names | string match --entire -r '^_?tide')

+ functions --erase (functions --all | string match --entire -r '^_?tide')

+end

+# fzf.fish is only meant to be used in interactive mode. If not in interactive mode and not in CI, skip the config to speed up shell startup

+if not status is-interactive && test "$CI" != true

+ exit

+end

+

+# Because of scoping rules, to capture the shell variables exactly as they are, we must read

+# them before even executing _fzf_search_variables. We use psub to store the

+# variables' info in temporary files and pass in the filenames as arguments.

+# This variable is global so that it can be referenced by fzf_configure_bindings and in tests

+set --global _fzf_search_vars_command '_fzf_search_variables (set --show | psub) (set --names | psub)'

+

+

+# Install the default bindings, which are mnemonic and minimally conflict with fish's preset bindings

+fzf_configure_bindings

+

+# Doesn't erase autoloaded _fzf_* functions because they are not easily accessible once key bindings are erased

+function _fzf_uninstall --on-event fzf_uninstall

+ _fzf_uninstall_bindings

+

+ set --erase _fzf_search_vars_command

+ functions --erase _fzf_uninstall _fzf_migration_message _fzf_uninstall_bindings fzf_configure_bindings

+ complete --erase fzf_configure_bindings

+

+ set_color cyan

+ echo "fzf.fish uninstalled."

+ echo "You may need to manually remove fzf_configure_bindings from your config.fish if you were using custom key bindings."

+ set_color normal

+end

+# Setup Nix

+

+# We need to distinguish between single-user and multi-user installs.

+# This is difficult because there's no official way to do this.

+# We could look for the presence of /nix/var/nix/daemon-socket/socket but this will fail if the

+# daemon hasn't started yet. /nix/var/nix/daemon-socket will exist if the daemon has ever run, but

+# I don't think there's any protection against accidentally running `nix-daemon` as a user.

+# We also can't just look for /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh because

+# older single-user installs used the default profile instead of a per-user profile.

+# We can still check for it first, because all multi-user installs should have it, and so if it's

+# not present that's a pretty big indicator that this is a single-user install. If it does exist,

+# we still need to verify the install type. To that end we'll look for a root owner and sticky bit

+# on /nix/store. Multi-user installs set both, single-user installs don't. It's certainly possible

+# someone could do a single-user install as root and then manually set the sticky bit but that

+# would be extremely unusual.

+

+set -l nix_profile_path /nix/var/nix/profiles/default/etc/profile.d/nix-daemon.sh

+set -l single_user_profile_path ~/.nix-profile/etc/profile.d/nix.sh

+if test -e $nix_profile_path

+ # The path exists. Double-check that this is a multi-user install.

+ # We can't just check for ~/.nix-profile/… because this may be a single-user install running as

+ # the wrong user.

+

+ # stat is not portable. Splitting the output of ls -nd is reliable on most platforms.

+ set -l owner (string split -n ' ' (command ls -nd /nix/store 2>/dev/null))[3]

+ if not test -k /nix/store -a $owner -eq 0

+ # /nix/store is either not owned by root or not sticky. Assume single-user.

+ set nix_profile_path $single_user_profile_path

+ end

+else

+ # The path doesn't exist. Assume single-user

+ set nix_profile_path $single_user_profile_path

+end

+

+if test -e $nix_profile_path

+ # Source the nix setup script

+ # We're going to run the regular Nix profile under bash and then print out a few variables

+ for line in (command env -u BASH_ENV bash -c '. "$0"; for name in PATH "${!NIX_@}"; do printf "%s=%s\0" "$name" "${!name}"; done' $nix_profile_path | string split0)

+ set -xg (string split -m 1 = $line)

+ end

+

+ # Insert Nix's fish share directories into fish's special variables.

+ # nixpkgs-installed fish tries to set these up already if NIX_PROFILES is defined, which won't

+ # be the case when sourcing $__fish_data_dir/share/config.fish normally, but might be for a

+ # recursive invocation. To guard against that, we'll only insert paths that don't already exit.

+ # Furthermore, for the vendor_conf.d sourcing, we'll use the pre-existing presence of a path in

+ # $fish_function_path to determine whether we want to source the relevant vendor_conf.d folder.

+

+ # To start, let's locally define NIX_PROFILES if it doesn't already exist.

+ set -al NIX_PROFILES

+ if test (count $NIX_PROFILES) -eq 0

+ set -a NIX_PROFILES $HOME/.nix-profile

+ end

+ # Replicate the logic from nixpkgs version of $__fish_data_dir/__fish_build_paths.fish.

+ set -l __nix_profile_paths (string split ' ' -- $NIX_PROFILES)[-1..1]

+ set -l __extra_completionsdir \

+ $__nix_profile_paths/etc/fish/completions \

+ $__nix_profile_paths/share/fish/vendor_completions.d

+ set -l __extra_functionsdir \

+ $__nix_profile_paths/etc/fish/functions \

+ $__nix_profile_paths/share/fish/vendor_functions.d

+ set -l __extra_confdir \

+ $__nix_profile_paths/etc/fish/conf.d \

+ $__nix_profile_paths/share/fish/vendor_conf.d \

+

+ ### Configure fish_function_path ###

+ # Remove any of our extra paths that may already exist.

+ # Record the equivalent __extra_confdir path for any function path that exists.

+ set -l existing_conf_paths

+ for path in $__extra_functionsdir

+ if set -l idx (contains --index -- $path $fish_function_path)

+ set -e fish_function_path[$idx]

+ set -a existing_conf_paths $__extra_confdir[(contains --index -- $path $__extra_functionsdir)]

+ end

+ end

+ # Insert the paths before $__fish_data_dir.

+ if set -l idx (contains --index -- $__fish_data_dir/functions $fish_function_path)

+ # Fish has no way to simply insert into the middle of an array.

+ set -l new_path $fish_function_path[1..$idx]

+ set -e new_path[$idx]

+ set -a new_path $__extra_functionsdir

+ set fish_function_path $new_path $fish_function_path[$idx..-1]

+ else

+ set -a fish_function_path $__extra_functionsdir

+ end

+

+ ### Configure fish_complete_path ###

+ # Remove any of our extra paths that may already exist.

+ for path in $__extra_completionsdir

+ if set -l idx (contains --index -- $path $fish_complete_path)

+ set -e fish_complete_path[$idx]

+ end

+ end

+ # Insert the paths before $__fish_data_dir.

+ if set -l idx (contains --index -- $__fish_data_dir/completions $fish_complete_path)

+ set -l new_path $fish_complete_path[1..$idx]

+ set -e new_path[$idx]

+ set -a new_path $__extra_completionsdir

+ set fish_complete_path $new_path $fish_complete_path[$idx..-1]

+ else

+ set -a fish_complete_path $__extra_completionsdir

+ end

+

+ ### Source conf directories ###

+ # The built-in directories were already sourced during shell initialization.

+ # Any __extra_confdir that came from $__fish_data_dir/__fish_build_paths.fish was also sourced.

+ # As explained above, we're using the presence of pre-existing paths in $fish_function_path as a

+ # signal that the corresponding conf dir has also already been sourced.

+ # In order to simulate this, we'll run through the same algorithm as found in

+ # $__fish_data_dir/config.fish except we'll avoid sourcing the file if it comes from an

+ # already-sourced location.

+ # Caveats:

+ # * Files will be sourced in a different order than we'd ideally do (because we're coming in

+ # after the fact to source them).

+ # * If there are existing extra conf paths, files in them may have been sourced that should have

+ # been suppressed by paths we're inserting in front.

+ # * Similarly any files in $__fish_data_dir/vendor_conf.d that should have been suppressed won't

+ # have been.

+ set -l sourcelist

+ for file in $__fish_config_dir/conf.d/*.fish $__fish_sysconf_dir/conf.d/*.fish

+ # We know these paths were sourced already. Just record them.

+ set -l basename (string replace -r '^.*/' '' -- $file)

+ contains -- $basename $sourcelist

+ or set -a sourcelist $basename

+ end

+ for root in $__extra_confdir

+ for file in $root/*.fish

+ set -l basename (string replace -r '^.*/' '' -- $file)

+ contains -- $basename $sourcelist

+ and continue

+ set -a sourcelist $basename

+ contains -- $root $existing_conf_paths

+ and continue # this is a pre-existing path, it will have been sourced already

+ [ -f $file -a -r $file ]

+ and source $file

+ end

+ end

+end

+if status is-login

+ eval "$(guix package --search-paths \

+ -p ~/.config/guix/current \

+ -p ~/.guix-profile \

+ -p /run/current-system/profile)"

+

+ fenv source /etc/profile

+ set -gx HOME_ENVIRONMENT $HOME/.guix-home

+ fenv source $HOME_ENVIRONMENT/setup-environment

+ fenv $HOME_ENVIRONMENT/on-first-login

+ fish_add_path -Pp ~/.local/bin

+ fish_add_path -Pp ~/.guix-home/profile/bin

+ fish_add_path -Pp /run/setuid-programs

+ fish_add_path -Pp ~/.nix-profile/bin

+ fish_add_path -Pp ~/.go/bin

+ set -gx GOPATH ~/.go

+ set -gx EDITOR nvim

+ set -gax --path XDG_DATA_DIRS ~/.nix-profile/share

+ # Bad

+ find ~/.config/fish/ -name "*tmp*" -exec rm {} +

+end

+if status is-interactive

+ set -gax --path XDG_DATA_DIRS ~/.local/share/flatpak/exports/share

+

+ set GPG_TTY $(tty)

+ export GPG_TTY

+ # Commands to run in interactive sessions can go here

+ alias quit exit

+ alias cat "bat --paging=never"

+ alias ds "sudo -E guix system -L ~/.config/guix/modules reconfigure ~/.config/guix/$(prompt_hostname).scm"

+ alias dh "guix home -L ~/.config/guix/modules reconfigure ~/.config/guix/home-config/home-configuration.scm && home-manager switch"

+ alias gc "git -C ~/.config/guix add . && git -C ~/.config/guix commit && git -C ~/.config/guix push all"

+ alias cg "git -C ~/.config/guix pull"

+ alias cgh "git -C ~/.config/guix pull stationeryh main"

+ alias python "python3"

+ alias spt "spotify_player"

+ alias ls "ls -p --color=auto"

+ alias grep "grep --color=auto"

+ alias ll "ls -l"

+

+ zoxide init --cmd cd fish | source

+

+end

+jorgebucaran/fisher

+ilancosman/tide@v6

+patrickf1/fzf.fish

+lilyball/nix-env.fish

+oh-my-fish/plugin-foreign-env

+function _fzf_configure_bindings_help --description "Prints the help message for fzf_configure_bindings."

+ echo "\

+USAGE:

+ fzf_configure_bindings [--COMMAND=[KEY_SEQUENCE]...]

+

+DESCRIPTION

+ fzf_configure_bindings installs key bindings for fzf.fish's commands and erases any bindings it

+ previously installed. It installs bindings for both default and insert modes. fzf.fish executes

+ it without options on fish startup to install the out-of-the-box key bindings.

+

+ By default, commands are bound to a mnemonic key sequence, shown below. Each command's binding

+ can be configured using a namesake corresponding option:

+ COMMAND | DEFAULT KEY SEQUENCE | CORRESPONDING OPTION

+ Search Directory | Ctrl+Alt+F (F for file) | --directory

+ Search Git Log | Ctrl+Alt+L (L for log) | --git_log

+ Search Git Status | Ctrl+Alt+S (S for status) | --git_status

+ Search History | Ctrl+R (R for reverse) | --history

+ Search Processes | Ctrl+Alt+P (P for process) | --processes

+ Search Variables | Ctrl+V (V for variable) | --variables

+ Override a command's binding by specifying its corresponding option with the desired key

+ sequence. Disable a command's binding by specifying its corresponding option with no value.

+

+ Because fzf_configure_bindings erases bindings it previously installed, it can be cleanly

+ executed multiple times. Once the desired fzf_configure_bindings command has been found, add it

+ to your config.fish in order to persist the customized bindings.

+

+ In terms of validation, fzf_configure_bindings fails if passed unknown options. It expects an

+ equals sign between an option's name and value. However, it does not validate key sequences.

+

+ Pass -h or --help to print this help message and exit.

+

+EXAMPLES

+ Default bindings but bind Search Directory to Ctrl+F and Search Variables to Ctrl+Alt+V

+ \$ fzf_configure_bindings --directory=\cf --variables=\e\cv

+ Default bindings but disable Search History

+ \$ fzf_configure_bindings --history=

+ An agglomeration of different options

+ \$ fzf_configure_bindings --git_status=\cg --history=\ch --variables= --processes=

+

+SEE Also

+ To learn more about fish key bindings, see bind(1) and fish_key_reader(1).

+"

+end

+# helper function for _fzf_search_variables

+function _fzf_extract_var_info --argument-names variable_name set_show_output --description "Extract and reformat lines pertaining to \$variable_name from \$set_show_output."

+ # Extract only the lines about the variable, all of which begin with either

+ # $variable_name: ...or... $variable_name[

+ string match --regex "^\\\$$variable_name(?::|\[).*" <$set_show_output |

+

+ # Strip the variable name prefix, including ": " for scope info lines

+ string replace --regex "^\\\$$variable_name(?:: )?" '' |

+

+ # Distill the lines of values, replacing...

+ # [1]: |value|

+ # ...with...

+ # [1] value

+ string replace --regex ": \|(.*)\|" ' $1'

+end

+# helper for _fzf_search_git_status

+# arg should be a line from git status --short, e.g.

+# MM functions/_fzf_preview_changed_file.fish

+# D README.md

+# R LICENSE -> "New License"

+function _fzf_preview_changed_file --argument-names path_status --description "Show the git diff of the given file."

+ # remove quotes because they'll be interpreted literally by git diff

+ # no need to requote when referencing $path because fish does not perform word splitting

+ # https://fishshell.com/docs/current/fish_for_bash_users.html

+ set -f path (string unescape (string sub --start 4 $path_status))

+ # first letter of short format shows index, second letter shows working tree

+ # https://git-scm.com/docs/git-status/2.35.0#_short_format

+ set -f index_status (string sub --length 1 $path_status)

+ set -f working_tree_status (string sub --start 2 --length 1 $path_status)

+

+ set -f diff_opts --color=always

+

+ if test $index_status = '?'

+ _fzf_report_diff_type Untracked

+ _fzf_preview_file $path

+ else if contains {$index_status}$working_tree_status DD AU UD UA DU AA UU

+ # Unmerged statuses taken directly from git status help's short format table

+ # Unmerged statuses are mutually exclusive with other statuses, so if we see

+ # these, then safe to assume the path is unmerged

+ _fzf_report_diff_type Unmerged

+ git diff $diff_opts -- $path

+ else

+ if test $index_status != ' '

+ _fzf_report_diff_type Staged

+

+ # renames are only detected in the index, never working tree, so only need to test for it here

+ # https://stackoverflow.com/questions/73954214

+ if test $index_status = R

+ # diff the post-rename path with the original path, otherwise the diff will show the entire file as being added

+ set -f orig_and_new_path (string split --max 1 -- ' -> ' $path)

+ git diff --staged $diff_opts -- $orig_and_new_path[1] $orig_and_new_path[2]

+ # path currently has the form of "original -> current", so we need to correct it before it's used below

+ set path $orig_and_new_path[2]

+ else

+ git diff --staged $diff_opts -- $path

+ end

+ end

+

+ if test $working_tree_status != ' '

+ _fzf_report_diff_type Unstaged

+ git diff $diff_opts -- $path

+ end

+ end

+end

+# helper function for _fzf_search_directory and _fzf_search_git_status

+function _fzf_preview_file --description "Print a preview for the given file based on its file type."

+ # because there's no way to guarantee that _fzf_search_directory passes the path to _fzf_preview_file

+ # as one argument, we collect all the arguments into one single variable and treat that as the path

+ set -f file_path $argv

+

+ if test -L "$file_path" # symlink

+ # notify user and recurse on the target of the symlink, which can be any of these file types

+ set -l target_path (realpath "$file_path")

+

+ set_color yellow

+ echo "'$file_path' is a symlink to '$target_path'."

+ set_color normal

+

+ _fzf_preview_file "$target_path"

+ else if test -f "$file_path" # regular file

+ if set --query fzf_preview_file_cmd

+ # need to escape quotes to make sure eval receives file_path as a single arg

+ eval "$fzf_preview_file_cmd '$file_path'"

+ else

+ bat --style=numbers --color=always "$file_path"

+ end

+ else if test -d "$file_path" # directory

+ if set --query fzf_preview_dir_cmd

+ # see above

+ eval "$fzf_preview_dir_cmd '$file_path'"

+ else

+ # -A list hidden files as well, except for . and ..

+ # -F helps classify files by appending symbols after the file name

+ command ls -A -F "$file_path"

+ end

+ else if test -c "$file_path"

+ _fzf_report_file_type "$file_path" "character device file"

+ else if test -b "$file_path"

+ _fzf_report_file_type "$file_path" "block device file"

+ else if test -S "$file_path"

+ _fzf_report_file_type "$file_path" socket

+ else if test -p "$file_path"

+ _fzf_report_file_type "$file_path" "named pipe"

+ else

+ echo "$file_path doesn't exist." >&2

+ end

+end

+# helper for _fzf_preview_changed_file

+# prints out something like

+# ╭────────╮

+# │ Staged │

+# ╰────────╯

+function _fzf_report_diff_type --argument-names diff_type --description "Print a distinct colored header meant to preface a git patch."

+ # number of "-" to draw is the length of the string to box + 2 for padding

+ set -f repeat_count (math 2 + (string length $diff_type))

+ set -f line (string repeat --count $repeat_count ─)

+ set -f top_border ╭$line╮

+ set -f btm_border ╰$line╯

+

+ set_color yellow

+ echo $top_border

+ echo "│ $diff_type │"

+ echo $btm_border

+ set_color normal

+end

+# helper function for _fzf_preview_file

+function _fzf_report_file_type --argument-names file_path file_type --description "Explain the file type for a file."

+ set_color red

+ echo "Cannot preview '$file_path': it is a $file_type."

+ set_color normal

+end

+function _fzf_search_directory --description "Search the current directory. Replace the current token with the selected file paths."

+ # Directly use fd binary to avoid output buffering delay caused by a fd alias, if any.

+ # Debian-based distros install fd as fdfind and the fd package is something else, so

+ # check for fdfind first. Fall back to "fd" for a clear error message.

+ set -f fd_cmd (command -v fdfind || command -v fd || echo "fd")

+ set -f --append fd_cmd --color=always $fzf_fd_opts

+

+ set -f fzf_arguments --multi --ansi $fzf_directory_opts

+ set -f token (commandline --current-token)

+ # expand any variables or leading tilde (~) in the token

+ set -f expanded_token (eval echo -- $token)

+ # unescape token because it's already quoted so backslashes will mess up the path

+ set -f unescaped_exp_token (string unescape -- $expanded_token)

+

+ # If the current token is a directory and has a trailing slash,

+ # then use it as fd's base directory.

+ if string match --quiet -- "*/" $unescaped_exp_token && test -d "$unescaped_exp_token"

+ set --append fd_cmd --base-directory=$unescaped_exp_token

+ # use the directory name as fzf's prompt to indicate the search is limited to that directory

+ set --prepend fzf_arguments --prompt="Directory $unescaped_exp_token> " --preview="_fzf_preview_file $expanded_token{}"

+ set -f file_paths_selected $unescaped_exp_token($fd_cmd 2>/dev/null | _fzf_wrapper $fzf_arguments)

+ else

+ set --prepend fzf_arguments --prompt="Directory> " --query="$unescaped_exp_token" --preview='_fzf_preview_file {}'

+ set -f file_paths_selected ($fd_cmd 2>/dev/null | _fzf_wrapper $fzf_arguments)

+ end

+

+

+ if test $status -eq 0

+ commandline --current-token --replace -- (string escape -- $file_paths_selected | string join ' ')

+ end

+

+ commandline --function repaint

+end

+function _fzf_search_git_log --description "Search the output of git log and preview commits. Replace the current token with the selected commit hash."

+ if not git rev-parse --git-dir >/dev/null 2>&1

+ echo '_fzf_search_git_log: Not in a git repository.' >&2

+ else

+ if not set --query fzf_git_log_format

+ # %h gives you the abbreviated commit hash, which is useful for saving screen space, but we will have to expand it later below

+ set -f fzf_git_log_format '%C(bold blue)%h%C(reset) - %C(cyan)%ad%C(reset) %C(yellow)%d%C(reset) %C(normal)%s%C(reset) %C(dim normal)[%an]%C(reset)'

+ end

+

+ set -f preview_cmd 'git show --color=always --stat --patch {1}'

+ if set --query fzf_diff_highlighter

+ set preview_cmd "$preview_cmd | $fzf_diff_highlighter"

+ end

+

+ set -f selected_log_lines (

+ git log --no-show-signature --color=always --format=format:$fzf_git_log_format --date=short | \

+ _fzf_wrapper --ansi \

+ --multi \

+ --scheme=history \

+ --prompt="Git Log> " \

+ --preview=$preview_cmd \

+ --query=(commandline --current-token) \

+ $fzf_git_log_opts

+ )

+ if test $status -eq 0

+ for line in $selected_log_lines

+ set -f abbreviated_commit_hash (string split --field 1 " " $line)

+ set -f full_commit_hash (git rev-parse $abbreviated_commit_hash)

+ set -f --append commit_hashes $full_commit_hash

+ end

+ commandline --current-token --replace (string join ' ' $commit_hashes)

+ end

+ end

+

+ commandline --function repaint

+end

+function _fzf_search_git_status --description "Search the output of git status. Replace the current token with the selected file paths."

+ if not git rev-parse --git-dir >/dev/null 2>&1

+ echo '_fzf_search_git_status: Not in a git repository.' >&2

+ else

+ set -f preview_cmd '_fzf_preview_changed_file {}'

+ if set --query fzf_diff_highlighter

+ set preview_cmd "$preview_cmd | $fzf_diff_highlighter"

+ end

+

+ set -f selected_paths (

+ # Pass configuration color.status=always to force status to use colors even though output is sent to a pipe

+ git -c color.status=always status --short |

+ _fzf_wrapper --ansi \

+ --multi \

+ --prompt="Git Status> " \

+ --query=(commandline --current-token) \

+ --preview=$preview_cmd \

+ --nth="2.." \

+ $fzf_git_status_opts

+ )

+ if test $status -eq 0

+ # git status --short automatically escapes the paths of most files for us so not going to bother trying to handle

+ # the few edges cases of weird file names that should be extremely rare (e.g. "this;needs;escaping")

+ set -f cleaned_paths

+

+ for path in $selected_paths

+ if test (string sub --length 1 $path) = R

+ # path has been renamed and looks like "R LICENSE -> LICENSE.md"

+ # extract the path to use from after the arrow

+ set --append cleaned_paths (string split -- "-> " $path)[-1]

+ else

+ set --append cleaned_paths (string sub --start=4 $path)

+ end

+ end

+

+ commandline --current-token --replace -- (string join ' ' $cleaned_paths)

+ end

+ end

+

+ commandline --function repaint

+end

+function _fzf_search_history --description "Search command history. Replace the command line with the selected command."

+ # history merge incorporates history changes from other fish sessions

+ # it errors out if called in private mode

+ if test -z "$fish_private_mode"

+ builtin history merge

+ end

+

+ if not set --query fzf_history_time_format

+ # Reference https://devhints.io/strftime to understand strftime format symbols

+ set -f fzf_history_time_format "%m-%d %H:%M:%S"

+ end

+

+ # Delinate time from command in history entries using the vertical box drawing char (U+2502).

+ # Then, to get raw command from history entries, delete everything up to it. The ? on regex is

+ # necessary to make regex non-greedy so it won't match into commands containing the char.

+ set -f time_prefix_regex '^.*? │ '

+ # Delinate commands throughout pipeline using null rather than newlines because commands can be multi-line

+ set -f commands_selected (

+ builtin history --null --show-time="$fzf_history_time_format │ " |

+ _fzf_wrapper --read0 \

+ --print0 \

+ --multi \

+ --scheme=history \

+ --prompt="History> " \

+ --query=(commandline) \

+ --preview="string replace --regex '$time_prefix_regex' '' -- {} | fish_indent --ansi" \

+ --preview-window="bottom:3:wrap" \

+ $fzf_history_opts |

+ string split0 |

+ # remove timestamps from commands selected

+ string replace --regex $time_prefix_regex ''

+ )

+

+ if test $status -eq 0

+ commandline --replace -- $commands_selected

+ end

+

+ commandline --function repaint

+end

+function _fzf_search_processes --description "Search all running processes. Replace the current token with the pid of the selected process."

+ # Directly use ps command because it is often aliased to a different command entirely

+ # or with options that dirty the search results and preview output

+ set -f ps_cmd (command -v ps || echo "ps")

+ # use all caps to be consistent with ps default format

+ # snake_case because ps doesn't seem to allow spaces in the field names

+ set -f ps_preview_fmt (string join ',' 'pid' 'ppid=PARENT' 'user' '%cpu' 'rss=RSS_IN_KB' 'start=START_TIME' 'command')

+ set -f processes_selected (

+ $ps_cmd -A -opid,command | \

+ _fzf_wrapper --multi \

+ --prompt="Processes> " \

+ --query (commandline --current-token) \

+ --ansi \

+ # first line outputted by ps is a header, so we need to mark it as so

+ --header-lines=1 \

+ # ps uses exit code 1 if the process was not found, in which case show an message explaining so

+ --preview="$ps_cmd -o '$ps_preview_fmt' -p {1} || echo 'Cannot preview {1} because it exited.'" \

+ --preview-window="bottom:4:wrap" \

+ $fzf_processes_opts

+ )

+

+ if test $status -eq 0

+ for process in $processes_selected

+ set -f --append pids_selected (string split --no-empty --field=1 -- " " $process)

+ end

+

+ # string join to replace the newlines outputted by string split with spaces

+ commandline --current-token --replace -- (string join ' ' $pids_selected)

+ end

+

+ commandline --function repaint

+end

+# This function expects the following two arguments:

+# argument 1 = output of (set --show | psub), i.e. a file with the scope info and values of all variables

+# argument 2 = output of (set --names | psub), i.e. a file with all variable names

+function _fzf_search_variables --argument-names set_show_output set_names_output --description "Search and preview shell variables. Replace the current token with the selected variable."

+ if test -z "$set_names_output"

+ printf '%s\n' '_fzf_search_variables requires 2 arguments.' >&2

+

+ commandline --function repaint

+ return 22 # 22 means invalid argument in POSIX

+ end

+

+ # Exclude the history variable from being piped into fzf because

+ # 1. it's not included in $set_names_output

+ # 2. it tends to be a very large value => increases computation time

+ # 3._fzf_search_history is a much better way to examine history anyway

+ set -f all_variable_names (string match --invert history <$set_names_output)

+

+ set -f current_token (commandline --current-token)

+ # Use the current token to pre-populate fzf's query. If the current token begins

+ # with a $, remove it from the query so that it will better match the variable names

+ set -f cleaned_curr_token (string replace -- '$' '' $current_token)

+

+ set -f variable_names_selected (

+ printf '%s\n' $all_variable_names |

+ _fzf_wrapper --preview "_fzf_extract_var_info {} $set_show_output" \

+ --prompt="Variables> " \

+ --preview-window="wrap" \

+ --multi \

+ --query=$cleaned_curr_token \

+ $fzf_variables_opts

+ )

+

+ if test $status -eq 0

+ # If the current token begins with a $, do not overwrite the $ when

+ # replacing the current token with the selected variable.

+ # Uses brace expansion to prepend $ to each variable name.

+ commandline --current-token --replace (

+ if string match --quiet -- '$*' $current_token

+ string join " " \${$variable_names_selected}

+ else

+ string join " " $variable_names_selected

+ end

+ )

+ end

+

+ commandline --function repaint

+end

+function _fzf_wrapper --description "Prepares some environment variables before executing fzf."

+ # Make sure fzf uses fish to execute preview commands, some of which

+ # are autoloaded fish functions so don't exist in other shells.

+ # Use --function so that it doesn't clobber SHELL outside this function.

+ set -f --export SHELL (command --search fish)

+

+ # If FZF_DEFAULT_OPTS is not set, then set some sane defaults.

+ # See https://github.com/junegunn/fzf#environment-variables

+ if not set --query FZF_DEFAULT_OPTS

+ # cycle allows jumping between the first and last results, making scrolling faster

+ # layout=reverse lists results top to bottom, mimicking the familiar layouts of git log, history, and env

+ # border shows where the fzf window begins and ends

+ # height=90% leaves space to see the current command and some scrollback, maintaining context of work

+ # preview-window=wrap wraps long lines in the preview window, making reading easier

+ # marker=* makes the multi-select marker more distinguishable from the pointer (since both default to >)

+ set --export FZF_DEFAULT_OPTS '--cycle --layout=reverse --border --height=90% --preview-window=wrap --marker="*"'

+ end

+

+ fzf $argv

+end

+function _tide_1_line_prompt

+ set -g add_prefix

+ _tide_side=left for item in $_tide_left_items

+ _tide_item_$item

+ end

+ set_color $prev_bg_color -b normal

+ echo $tide_left_prompt_suffix

+

+ set -g add_prefix

+ _tide_side=right for item in $_tide_right_items

+ _tide_item_$item

+ end

+ set_color $prev_bg_color -b normal

+ echo $tide_right_prompt_suffix

+end

+

+function _tide_item_pwd

+ _tide_print_item pwd @PWD@

+end

+function _tide_2_line_prompt

+ set -g add_prefix

+ _tide_side=left for item in $_tide_left_items

+ _tide_item_$item

+ end

+ if not set -e add_prefix

+ set_color $prev_bg_color -b normal

+ echo $tide_left_prompt_suffix

+ end

+

+ echo

+

+ set -g add_prefix

+ _tide_side=right for item in $_tide_right_items

+ _tide_item_$item

+ end

+ if not set -e add_prefix

+ set_color $prev_bg_color -b normal

+ echo $tide_right_prompt_suffix

+ end

+end

+

+function _tide_item_pwd

+ _tide_print_item pwd @PWD@

+end

+

+function _tide_item_newline

+ set_color $prev_bg_color -b normal

+ v=tide_"$_tide_side"_prompt_suffix echo $$v

+ set -g add_prefix

+end

+function _tide_cache_variables

+ # Same-color-separator color

+ set_color $tide_prompt_color_separator_same_color | read -gx _tide_color_separator_same_color

+

+ # git

+ contains git $_tide_left_items $_tide_right_items && set_color $tide_git_color_branch | read -gx _tide_location_color

+

+ # private_mode

+ if contains private_mode $_tide_left_items $_tide_right_items && test -n "$fish_private_mode"

+ set -gx _tide_private_mode

+ else

+ set -e _tide_private_mode

+ end

+

+ # item padding

+ test "$tide_prompt_pad_items" = true && set -gx _tide_pad ' ' || set -e _tide_pad

+end

+# Outputs icon, color, bg_color

+function _tide_detect_os

+ set -lx defaultColor 080808 CED7CF

+ switch (uname | string lower)

+ case darwin

+ printf %s\n  D6D6D6 333333 # from apple.com header

+ case freebsd openbsd dragonfly

+ printf %s\n  FFFFFF AB2B28 # https://freebsdfoundation.org/about-us/about-the-foundation/project/

+ case 'cygwin*' 'mingw*_nt*' 'msys_nt*'

+ printf %s\n  FFFFFF 00CCFF # https://answers.microsoft.com/en-us/windows/forum/all/what-is-the-official-windows-8-blue-rgb-or-hex/fd57144b-f69b-42d8-8c21-6ca911646e44

+ case linux

+ if test (uname -o) = Android

+ echo ﲎ # This character is evil and messes up code display, so it's put on its own line

+ # https://developer.android.com/distribute/marketing-tools/brand-guidelines

+ printf %s\n 3DDC84 3C3F41 # fg is from above link, bg is from Android Studio default dark theme

+ else

+ _tide_detect_os_linux_cases /etc/os-release ID ||

+ _tide_detect_os_linux_cases /etc/os-release ID_LIKE ||

+ _tide_detect_os_linux_cases /etc/lsb-release DISTRIB_ID ||

+ printf %s\n  $defaultColor

+ end

+ case '*'

+ echo -ns '?'

+ end

+end

+

+function _tide_detect_os_linux_cases -a file key

+ test -e $file || return

+ set -l split_file (string split '=' <$file)

+ set -l key_index (contains --index $key $split_file) || return

+ set -l value (string trim --chars='"' $split_file[(math $key_index + 1)])

+

+ # Anything which would have pure white background has been changed to D4D4D4

+ # It was just too bright otherwise

+ switch (string lower $value)

+ case alpine

+ printf %s\n  FFFFFF 0D597F # from alpine logo

+ case arch

+ printf %s\n  1793D1 4D4D4D # from arch wiki header

+ case centos

+ printf %s\n  000000 D4D4D4 # https://wiki.centos.org/ArtWork/Brand/Logo, monochromatic

+ case debian

+ printf %s\n  C70036 D4D4D4 # from debian logo https://www.debian.org/logos/openlogo-nd-100.png

+ case devuan

+ printf %s\n  $defaultColor # logo is monochromatic

+ case elementary

+ printf %s\n  000000 D4D4D4 # https://elementary.io/brand, encouraged to be monochromatic

+ case fedora

+ printf %s\n  FFFFFF 294172 # from logo https://fedoraproject.org/w/uploads/2/2d/Logo_fedoralogo.png

+ case gentoo

+ printf %s\n  FFFFFF 54487A # https://wiki.gentoo.org/wiki/Project:Artwork/Colors

+ case mageia

+ printf %s\n  FFFFFF 262F45 # https://wiki.mageia.org/en/Artwork_guidelines

+ case manjaro

+ printf %s\n  FFFFFF 35BF5C # from https://gitlab.manjaro.org/artwork/branding/logo/-/blob/master/logo.svg

+ case mint linuxmint

+ printf %s\n  FFFFFF 69B53F # extracted from https://linuxmint.com/web/img/favicon.ico

+ case nixos

+ printf %s\n  FFFFFF 5277C3 # https://github.com/NixOS/nixos-artwork/tree/master/logo

+ case opensuse-leap opensuse-tumbleweed opensuse-microos

+ printf %s\n  73BA25 173f4f # https://en.opensuse.org/openSUSE:Artwork_brand

+ case raspbian

+ printf %s\n  FFFFFF A22846 # https://static.raspberrypi.org/files/Raspberry_Pi_Visual_Guidelines_2020.pdf

+ case rhel

+ printf %s\n  EE0000 000000 # https://www.redhat.com/en/about/brand/standards/color

+ case sabayon

+ printf %s\n  $defaultColor # Can't find colors, and they are rebranding anyway

+ case slackware

+ printf %s\n  $defaultColor # Doesn't really have a logo, and the colors are too close to PWD blue anyway

+ case ubuntu

+ printf %s\n  E95420 D4D4D4 # https://design.ubuntu.com/brand/

+ case void

+ printf %s\n  FFFFFF 478061 # from https://alpha.de.repo.voidlinux.org/logos/void.svg

+ case '*'

+ return 1

+ end

+end

+function _tide_find_and_remove -a name list --no-scope-shadowing

+ contains --index $name $$list | read -l index && set -e "$list"[$index]

+end

+function _tide_fish_colorize

+ if command -q fish_indent

+ echo -ns "$argv" | fish_indent --ansi

+ else

+ echo -ns "$argv"

+ end

+end

+function _tide_item_aws

+ # AWS_PROFILE overrides AWS_DEFAULT_PROFILE, AWS_REGION overrides AWS_DEFAULT_REGION

+ set -q AWS_PROFILE && set -l AWS_DEFAULT_PROFILE $AWS_PROFILE

+ set -q AWS_REGION && set -l AWS_DEFAULT_REGION $AWS_REGION

+

+ if test -n "$AWS_DEFAULT_PROFILE" && test -n "$AWS_DEFAULT_REGION"

+ _tide_print_item aws $tide_aws_icon' ' "$AWS_DEFAULT_PROFILE/$AWS_DEFAULT_REGION"

+ else if test -n "$AWS_DEFAULT_PROFILE$AWS_DEFAULT_REGION"

+ _tide_print_item aws $tide_aws_icon' ' "$AWS_DEFAULT_PROFILE$AWS_DEFAULT_REGION"

+ end

+end

+function _tide_item_character

+ test $_tide_status = 0 && set_color $tide_character_color || set_color $tide_character_color_failure

+

+ set -q add_prefix || echo -ns ' '

+

+ test "$fish_key_bindings" = fish_default_key_bindings && echo -ns $tide_character_icon ||

+ switch $fish_bind_mode

+ case insert

+ echo -ns $tide_character_icon

+ case default

+ echo -ns $tide_character_vi_icon_default

+ case replace replace_one

+ echo -ns $tide_character_vi_icon_replace

+ case visual

+ echo -ns $tide_character_vi_icon_visual

+ end

+end

+function _tide_item_cmd_duration

+ test $CMD_DURATION -gt $tide_cmd_duration_threshold && t=(

+ math -s0 "$CMD_DURATION/3600000" # Hours

+ math -s0 "$CMD_DURATION/60000"%60 # Minutes

+ math -s$tide_cmd_duration_decimals "$CMD_DURATION/1000"%60) if test $t[1] != 0

+ _tide_print_item cmd_duration $tide_cmd_duration_icon' ' "$t[1]h $t[2]m $t[3]s"

+ else if test $t[2] != 0

+ _tide_print_item cmd_duration $tide_cmd_duration_icon' ' "$t[2]m $t[3]s"

+ else

+ _tide_print_item cmd_duration $tide_cmd_duration_icon' ' "$t[3]s"

+ end

+end

+function _tide_item_context

+ if set -q SSH_TTY

+ set -fx tide_context_color $tide_context_color_ssh

+ else if test "$EUID" = 0

+ set -fx tide_context_color $tide_context_color_root

+ else if test "$tide_context_always_display" = true

+ set -fx tide_context_color $tide_context_color_default

+ else

+ return

+ end

+

+ string match -qr "^(?<h>(\.?[^\.]*){0,$tide_context_hostname_parts})" @$hostname

+ _tide_print_item context $USER$h

+end

+function _tide_item_crystal

+ if path is $_tide_parent_dirs/shard.yml

+ crystal --version | string match -qr "(?<v>[\d.]+)"

+ _tide_print_item crystal $tide_crystal_icon' ' $v

+ end

+end

+function _tide_item_direnv

+ set -q DIRENV_DIR || return

+ direnv status | string match -q 'Found RC allowed false' &&

+ set -lx tide_direnv_color $tide_direnv_color_denied &&

+ set -lx tide_direnv_bg_color $tide_direnv_bg_color_denied

+ _tide_print_item direnv $tide_direnv_icon

+end

+function _tide_item_distrobox

+ test -e /etc/profile.d/distrobox_profile.sh && test -e /run/.containerenv &&

+ _tide_print_item distrobox $tide_distrobox_icon' ' (string match -rg 'name="(.*)"' </run/.containerenv)

+end

+function _tide_item_docker

+ docker context inspect --format '{{.Name}}' | read -l context

+ contains -- "$context" $tide_docker_default_contexts ||

+ _tide_print_item docker $tide_docker_icon' ' $context

+end

+function _tide_item_elixir

+ path is $_tide_parent_dirs/mix.exs &&

+ _tide_print_item elixir $tide_elixir_icon' ' (elixir --short-version)

+end

+function _tide_item_gcloud

+ set -q CLOUDSDK_CONFIG || set -l CLOUDSDK_CONFIG ~/.config/gcloud

+ path is $CLOUDSDK_CONFIG/active_config &&

+ read -l config <$CLOUDSDK_CONFIG/active_config &&

+ path is $CLOUDSDK_CONFIG/configurations/config_$config &&

+ string match -qr '^\s*project\s*=\s*(?<project>.*)' <$CLOUDSDK_CONFIG/configurations/config_$config &&

+ _tide_print_item gcloud $tide_gcloud_icon' ' $project

+end

+function _tide_item_git

+ if git branch --show-current 2>/dev/null | string shorten -"$tide_git_truncation_strategy"m$tide_git_truncation_length | read -l location

+ git rev-parse --git-dir --is-inside-git-dir | read -fL gdir in_gdir

+ set location $_tide_location_color$location

+ else if test $pipestatus[1] != 0

+ return

+ else if git tag --points-at HEAD | string shorten -"$tide_git_truncation_strategy"m$tide_git_truncation_length | read location

+ git rev-parse --git-dir --is-inside-git-dir | read -fL gdir in_gdir

+ set location '#'$_tide_location_color$location

+ else

+ git rev-parse --git-dir --is-inside-git-dir --short HEAD | read -fL gdir in_gdir location

+ set location @$_tide_location_color$location

+ end

+

+ # Operation

+ if test -d $gdir/rebase-merge

+ # Turn ANY into ALL, via double negation

+ if not path is -v $gdir/rebase-merge/{msgnum,end}

+ read -f step <$gdir/rebase-merge/msgnum

+ read -f total_steps <$gdir/rebase-merge/end

+ end

+ test -f $gdir/rebase-merge/interactive && set -f operation rebase-i || set -f operation rebase-m

+ else if test -d $gdir/rebase-apply

+ if not path is -v $gdir/rebase-apply/{next,last}

+ read -f step <$gdir/rebase-apply/next

+ read -f total_steps <$gdir/rebase-apply/last

+ end

+ if test -f $gdir/rebase-apply/rebasing

+ set -f operation rebase

+ else if test -f $gdir/rebase-apply/applying

+ set -f operation am

+ else

+ set -f operation am/rebase

+ end

+ else if test -f $gdir/MERGE_HEAD

+ set -f operation merge

+ else if test -f $gdir/CHERRY_PICK_HEAD

+ set -f operation cherry-pick

+ else if test -f $gdir/REVERT_HEAD

+ set -f operation revert

+ else if test -f $gdir/BISECT_LOG

+ set -f operation bisect

+ end

+

+ # Git status/stash + Upstream behind/ahead

+ test $in_gdir = true && set -l _set_dir_opt -C $gdir/..

+ # Suppress errors in case we are in a bare repo or there is no upstream

+ set -l stat (git $_set_dir_opt --no-optional-locks status --porcelain 2>/dev/null)

+ string match -qr '(0|(?<stash>.*))\n(0|(?<conflicted>.*))\n(0|(?<staged>.*))

+(0|(?<dirty>.*))\n(0|(?<untracked>.*))(\n(0|(?<behind>.*))\t(0|(?<ahead>.*)))?' \

+ "$(git $_set_dir_opt stash list 2>/dev/null | count

+ string match -r ^UU $stat | count

+ string match -r ^[ADMR]. $stat | count

+ string match -r ^.[ADMR] $stat | count

+ string match -r '^\?\?' $stat | count

+ git rev-list --count --left-right @{upstream}...HEAD 2>/dev/null)"

+

+ if test -n "$operation$conflicted"

+ set -g tide_git_bg_color $tide_git_bg_color_urgent

+ else if test -n "$staged$dirty$untracked"

+ set -g tide_git_bg_color $tide_git_bg_color_unstable

+ end

+

+ _tide_print_item git $_tide_location_color$tide_git_icon' ' (set_color white; echo -ns $location

+ set_color $tide_git_color_operation; echo -ns ' '$operation ' '$step/$total_steps

+ set_color $tide_git_color_upstream; echo -ns ' ⇣'$behind ' ⇡'$ahead

+ set_color $tide_git_color_stash; echo -ns ' *'$stash

+ set_color $tide_git_color_conflicted; echo -ns ' ~'$conflicted

+ set_color $tide_git_color_staged; echo -ns ' +'$staged

+ set_color $tide_git_color_dirty; echo -ns ' !'$dirty

+ set_color $tide_git_color_untracked; echo -ns ' ?'$untracked)

+end

+function _tide_item_go

+ if path is $_tide_parent_dirs/go.mod

+ go version | string match -qr "(?<v>[\d.]+)"

+ _tide_print_item go $tide_go_icon' ' $v

+ end

+end

+function _tide_item_java

+ if path is $_tide_parent_dirs/pom.xml

+ java -version &| string match -qr "(?<v>[\d.]+)"

+ _tide_print_item java $tide_java_icon' ' $v

+ end

+end

+function _tide_item_jobs

+ set -q _tide_jobs && if test $_tide_jobs -ge $tide_jobs_number_threshold

+ _tide_print_item jobs $tide_jobs_icon' ' $_tide_jobs

+ else

+ _tide_print_item jobs $tide_jobs_icon

+ end

+end

+function _tide_item_kubectl

+ kubectl config view --minify --output 'jsonpath={.current-context}/{..namespace}' 2>/dev/null | read -l context &&

+ _tide_print_item kubectl $tide_kubectl_icon' ' (string replace -r '/(|default)$' '' $context)

+end

+function _tide_item_nix_shell

+ set -q IN_NIX_SHELL && _tide_print_item nix_shell $tide_nix_shell_icon' ' $IN_NIX_SHELL

+end

+function _tide_item_node

+ if path is $_tide_parent_dirs/package.json

+ node --version | string match -qr "v(?<v>.*)"

+ _tide_print_item node $tide_node_icon' ' $v

+ end

+end

+function _tide_item_os

+ _tide_print_item os $tide_os_icon

+end

+function _tide_item_php

+ if path is $_tide_parent_dirs/composer.json

+ php --version | string match -qr "(?<v>[\d.]+)"

+ _tide_print_item php $tide_php_icon' ' $v

+ end

+end

+function _tide_item_private_mode

+ set -q _tide_private_mode && _tide_print_item private_mode $tide_private_mode_icon

+end

+function _tide_item_pulumi

+ if path filter $_tide_parent_dirs/Pulumi.yaml | read -l yaml_path

+ if command -q sha1sum

+ echo -n "$yaml_path" | sha1sum | string match -qr "(?<path_hash>.{40})"

+ else if command -q shasum

+ echo -n "$yaml_path" | shasum | string match -qr "(?<path_hash>.{40})"

+ else

+ return

+ end

+

+ string match -qr 'name: *(?<project_name>.*)' <$yaml_path

+ set -l workspace_file "$HOME/.pulumi/workspaces/$project_name-$path_hash-workspace.json"

+

+ if test -e $workspace_file

+ string match -qr '"stack": *"(?<stack>.*)"' <$workspace_file

+ _tide_print_item pulumi $tide_pulumi_icon' ' $stack

+ end

+ end

+end

+function _tide_item_python

+ if test -n "$VIRTUAL_ENV"

+ if command -q python3

+ python3 --version | string match -qr "(?<v>[\d.]+)"

+ else

+ python --version | string match -qr "(?<v>[\d.]+)"

+ end

+ string match -qr "^.*/(?<dir>.*)/(?<base>.*)" $VIRTUAL_ENV

+ # pipenv $VIRTUAL_ENV looks like /home/ilan/.local/share/virtualenvs/pipenv_project-EwRYuc3l

+ # Detect whether we are using pipenv by looking for 'virtualenvs'. If so, remove the hash at the end.

+ if test "$dir" = virtualenvs

+ string match -qr "(?<base>.*)-.*" $base

+ _tide_print_item python $tide_python_icon' ' "$v ($base)"

+ else if contains -- "$base" virtualenv venv .venv env # avoid generic names

+ _tide_print_item python $tide_python_icon' ' "$v ($dir)"

+ else

+ _tide_print_item python $tide_python_icon' ' "$v ($base)"

+ end

+ else if path is .python-version Pipfile __init__.py pyproject.toml requirements.txt setup.py

+ if command -q python3

+ python3 --version | string match -qr "(?<v>[\d.]+)"

+ else

+ python --version | string match -qr "(?<v>[\d.]+)"

+ end

+ _tide_print_item python $tide_python_icon' ' $v

+ end

+end

+function _tide_item_ruby

+ if path is $_tide_parent_dirs/{*.gemspec,Gemfile,Rakefile,.ruby-version}

+ ruby --version | string match -qr "(?<v>[\d.]+)"

+ _tide_print_item ruby $tide_ruby_icon' ' $v

+ end

+end